Axis 2N Access Unit Configuration Manual page 105

List of Parameters
Synchronise – push the button to synchronise the
PC time value.
Time Zone – set the time zone for the installation site to define time shifts and
winter/summer time transitions.
Time Zone Rule – if the
in the Time zone parameter, set the time zone rule manually. The rule is applied
only if the Time zone parameter is set to
/summer time transitions manually).
Use NTP Server – enable the NTP server use for
synchronisation.
NTP Server Address – set the IP address/domain name of the NTP server used
for your 2N Access Unit
2N TELEKOMUNIKACE a.s., www.2n.cz
2N Access Unit is installed on a site that it not included
Manual
time synchronisation.
2N Access Unit time value with your
(specify time shifts and winter
2N Access Unit time
105/128