Signalling Of Operational Statuses - Axis 2N Access Unit Configuration Manual

4. Signalling of Operational
Statuses
2N Access Unit generates sounds to signal changes and switching of operational
statuses. Each status change is assigned a different type of tone. See the table below
for the list of signals:
Note
Signalling of some of the above mentioned statuses can be modified;
refer to the User Sounds subsection.
Tones
2N TELEKOMUNIKACE a.s., www.2n.cz
Meaning
User activated
This tone signals entering of the user activation code. The activation code
is used for user (user's position) activation. Refer to the Users subsection
for the activation code settings.
User deactivated
This tone signals entering of the user deactivation code. The deactivation
code is used for user (user's position) deactivation. Refer to the Users
subsection for the deactivation code settings.
Profile activated
This tone signals profile activation. This function helps enable alerting of a
user group in an office, for example. Refer to the Profile subsection for
the activation code settings.
10/128