Axis 2N Access Unit Configuration Manual page 8
Hide thumbs
Also See for 2N Access Unit:
- User manual (117 pages) ,
- Configuration manual (12 pages) ,
- User manual (82 pages)
Table of Contents
Advertisement
Electric Lock Switching Settings
An electric door lock can be attached to the
2N Access Unit
and controlled by a code
from the numeric keypad. Connect the electric lock as instructed in the respective
Installation Manual.
Enable the switch in the Switch Enabled parameter on the Hardware / Switches /
Switch 1
tab, set the Controlled Output to the intercom output to which the electric
door lock is connected. Now set one or more activation codes for the electric door
lock switching.
2N TELEKOMUNIKACE a.s., www.2n.cz
8/128
Advertisement
Table of Contents
