Axis 2N Access Unit Configuration Manual page 64

Infopanel Module Configuration
No parameters are available to the public at present.
Card Reader Module Configuration
Module Name – set the module name for card reader logging purposes.
Door – set the reader direction (Not specified, Arrival, Departure) for the
Attendance system purposes.
Associated Switch – set the switch to be activated after user authentication via
this module. If you set Door Lock Switch, the authentication rules specified in
Hardware / Door will be used.
Allowed Card Types – set the type of a card to be accepted by the card reader.
The card reader supports just one card type at an instant.
Forward to Wiegand Output – set a group of Wiegand outputs to which all the
2N TELEKOMUNIKACE a.s., www.2n.cz 64/128