Axis 2N Access Unit Configuration Manual page 45
Hide thumbs
Also See for 2N Access Unit:
- User manual (117 pages) ,
- Configuration manual (12 pages) ,
- User manual (82 pages)
Table of Contents
Advertisement
Tip
In case of use external relay
part no.: 9137410E
are used next HTTP
commands:
To turn on the switch –
http://ip_address/state.xml?relayState=1
(e.g.:
http://192.168.1.10/state.xml?relayState=1
)
To turn on for pre-defined time (default value is 1.5 s) – http://ip_address
/state.xml?relayState=2
(e.g.:
http://192.168.1.10/state.xml?relayState=2
)
To turn off –
http://ip_address/state.xml?relayState=0
(e.g.:
http://192.168.1.10
/state.xml?relayState=0
)
In case of use external relay
part no.: 9137411E
are used next HTTP commands
(Symbol X should be replaced with a number of the desired switch):
To turn on the switch –
http://ip_address/state.xml?relayXState=1
(e.g.:
http://192.168.1.10/state.xml?relay1State=1
)
To turn on for pre-defined time (default value is 1.5 s) – http://ip_address
/state.xml?relayXState=2
(e.g.:
http://192.168.1.10/state.xml?relay1State=2
)
To turn off –
http://ip_address/state.xml?relayXState=0
(e.g.:
http://192.
168.1.10/state.xml?relay1State=0
)
2N TELEKOMUNIKACE a.s., www.2n.cz
45/128
Advertisement
Table of Contents
