Express Wizard For Basic Settings - Axis 2N Access Unit Configuration Manual

2. Express Wizard for Basic
Settings
LAN Connection Setting
You have to know the IP address to connect to the 2N Access Unit configuration
interface successfully. Automatic IP address retrieval from the DHCP server is set by
default in the 2N Access Unit . Thus, if connected to a network in which a DHCP server
configured to assign IP addresses to all new devices is available, the device will obtain
an IP address from the DHCP server. The 2N Access Unit IP address can be found in
the DHCP server status (according to the MAC address given on the production
plate), or will be communicated to you by the 2N Access Unit voice function; refer to
the Installation Manual.
If there is no DHCP server in your LAN, use the 2N Access Unit RESET button to set
the static IP address mode; refer to the respective Installation Manual. Your unit
address will then be 192.168.1.100 . Use it for the first login and then change it if
necessary.
Now enter the IP address into your favourite browser. We recommend you to use the
latest Chrome, Firefox or Internet Explorer (Edge) versions as 2N Access Unit is not
fully compatible with earlier browser versions.
Use the name "admin" and password "2n" (i.e. default reset password) for your first
login to the configuration interface. We recommend you to change the default
password upon your first login; refer to the Password parameter in the Services / Web
Server menu. Remember the password well or put it down. It is because if you forget
the password, you will have to reset the intercom to default values (refer to the
respective Installation Manual) thus losing all your current configuration changes.
Tip
FAQ: IP address – How to get the 2N Access Unit IP address?
2N TELEKOMUNIKACE a.s., www.2n.cz 6/128