Axis 2N Access Unit Configuration Manual page 41

5.3.1 Switches
Switches provide a very flexible and efficient control of such peripherals connected to
the Access Unit as electric door locks, lighting, additional ringing signalling, and so on.
2N Access Unit allows you to configure to 2 independent all-purpose switches.
A switch can be activated by:
entering a valid code via the
tapping a valid RFID card on the reader.
a predefined delay after another switch activation.
by a time profile
receiving an HTTP command from another LAN device 1).
the Action.ActivateSwitch action via Automation.
Switch activation can be blocked by an appropriately selected time profile if
necessary.
If a switch is active, you can:
activate any logical output of the
activate the output to which the
send an HTTP command to another device.
2N TELEKOMUNIKACE a.s., www.2n.cz
2N Access Unit numeric keypad.
2N Access Unit
®
2N IP Security Relay
(relay, power output).
module is connected.
41/128