Axis 2N Access Unit Configuration Manual page 110

5.5.5 Auto Provisioning
The 2N Access Unit
automatically from a storage on a TFTP/HTTP server selected by you according to
predefined rules.
You can configure the TFTP and HTTP server address manually. The 2N Access Unit
supports automatic address identification via the local DHCP server (Option 66).
Firmware
Use the Firmware tab to set automatic firmware download from a server defined by
you. The 2N Access Unit
periodically and, if the server file is more recent, automatically updates firmware and
gets restarted (approx. 30 s). Hence, we recommend you to update when the 2N
Access Unit traffic is very low (at night, e.g.).
The 2N Access Unit
MODEL-firmware.bin –
1.
MODEL-common.xml – common configuration for all 2N Access Unit
2.
MODEL- MACADDR
3.
2N TELEKOMUNIKACE a.s., www.2n.cz
allows you to update firmware and configuration manually or
compares the server file with its current firmware file
expects the following files:
2N Access Unit
.xml –specific configuration for one
firmware
2N Access Unit
110/128