Axis 2N Access Unit Configuration Manual page 114

Address Retrieval Mode – select whether the TFTP/HTTP server address shall be
entered manually or a value retrieved automatically from the DHCP server using
Option 66 shall be used.
Server Address – enter the TFTP (
or HTTPS ( https://ip_address
DHCP (Option 66/150) Address – check the server address retrieved via the
DHCP Option 66 or 150.
File Path – set the firmware/configuration filename directory or prefix on the
server. The intercom expects the XhipY_firmware.bin, XhipY-common.xml and
XhipY-MACADDR.xml files, where X is the prefix specified herein and Y specifies
the intercom model.
Use Authenticatio n – enable authentication for HTTP server access.
Username – enter the user name for server authentication.
Password – enter the password for server authentication.
Trusted Certificate
public certificate.
User Certificate
intercom right to communicate with the ACS.
Info
The intercom contains the Factory Cert, a signed certificate used for
British Telecom integration, for example.
At Boot Time – enable check and, if possible, update execution upon every
intercom start.
Update Period – set the update period. Set an automatic update to take place
hourly/daily/weekly/monthly, or set the period manually.
Update At – set the update time in the HH:MM format for periodical updating at
a low-traffic time. The parameter is not applied if the update period is set to a
value shorter than 1 day.
Next Update At – set the next update time.
2N TELEKOMUNIKACE a.s., www.2n.cz
tftp://ip_address
) server address manually.
– set the set of CA certificates for validation of the ACS
– specify the user certificate and private key to validate the
), HTTP ( http://ip_address )
114/128