Axis 2N Access Unit Configuration Manual page 50

Service cards are two common cards that are dedicated to this particular purpose by
you. Be sure to complete their IDs in the Plus card ID and Minus card ID items in this
section. The count of access card ID characters is given by the card type and is
variable. However, it holds true that all cards of the same type have equally long IDs.
The plus/minus cards are used for user card administration. When a plus card is
tapped on the card reader, any other tapped card is added to the Directory list as a
new user with an access card assigned. The user !Visitor #card_ID is automatically
created in the device. When a minus card is tapped on the card reader, any other
tapped card and its user are deleted from the Directory list. The RFID card record will
be cancelled and access via this card will be blocked.
Plus card ID – enter the service card ID for adding cards to the Installed cards: a
sequence of 6 to 32 characters including 0–9, A–F.
Minus card ID – enter the service card ID for removing cards from the Installed
cards: a sequence of 6 to 32 characters including 0–9, A–F.
Anti-Passback is a security function preventing users to use their access cards or
other identifiers to re-enter an area without leaving it before (i.e. preventing users
from sharing cards).
Mode – enable/disable the Anti-Passback mode:
Off – the function is Off by default allowing the user to use the access card
or another identifier to re-enter an area without leaving it before.
Soft – the user is allowed to use the access card or another identifier to re-
enter an area without leaving it before. A new
in Status / Events.
Hard – the user is not allowed to use the access card or another identifier
to re-enter an area without leaving it before. A new
made in Status / Events.
Time limitation – select an Anti-Passback timeout during which the user cannot
re-enter an area using the given authentication method (card, code, etc.) in the
same direction.
2N TELEKOMUNIKACE a.s., www.2n.cz
AccessTaken record is made
UserRejected record is
50/128