5
EX35(C)/EX40(C)/EX45(C)/EX50(C)
-24
(1) Position Control Lever
(2) Lock Bolt
7. The lower limit of the implement's
lowering height can be set by limit-
ing the movement of the lever by
the lock bolt.
! ! ! ! !
If trying to lift an object with ex-
cessive weight by the 3-point
hitch while the tractor is not
equipped with proper front suit
case weights, the front wheels
may be lifted instead, leading to
roll over. Make sure to follow the
specifications for use.
H11O580A
WARNING
DRAFT CONTROL(IF EQUIPPED)
(1) Draft Control Lever
(A) Lowering
1. The draft control function is used to
prevent the wheels from rotating idle
and the engine from stopping due
to excessive draft load when the
tractor is used for work which re-
quires a lot of draft, such as plowing.
H11O527A