Additional Weight - Kioti Daedong EX35 Manual

4
-64

ADDITIONAL WEIGHT

ADDITIONAL FRONT WEIGHT
(1) Additional front weight
If the loader is not installed, attach a
weight to the front frame of the tractor
as a safety measure.
If a heavy implement is installed at the
rear or when towing a heavy trailer, the
front wheels may be lifted. Add sufficient
weight to keep steerability and to pre-
vent rollover.
If sufficient weight, such as front loader,
is applied to the front wheels, remove
the extra front weight.
If not removed, you may experience
hard steering, rapid wear of tires, and
reduction of the front axle's life span
due to additional weight.
COMPONENTS FOR ADDITIONAL
FRONT WEIGHT
H11O4D3A
(1) Front Bracket
(2) Spring Washer
(3) Bolt
(4) Nut
(5) Balance Weight
(6) Bolt
When installing or removing a weight,
always check the tire inflation pressure
and adjust it as necessary.
The front weights are available at the
KIOTI Dealer. For required number of
weights, consult your local KIOTI Dea-
ler.
H11O4D4A
(7) Spring Washer
(8) Nut
Additional weight might be
(9) Front Weight Bolt
needed for transporting heavy
(10) Nut
implements.
(11) Spring Washer
Reduce the speed regardless of
(12) Plain Washer
additional weight when driving
on a bumpy or rough road with
the implement lifted. The trac-
tor can roll over.
Attach only required amount of
weight.
The life of the axle or wheel can
be shortened.
Model Max. load
17 kg x 5 Pieces
ALL
(187lbs)
! ! ! ! !
IMPORTANT