Key Switch - Kioti Daedong EX35 Manual

KEY SWITCH

(1) Key switch

(B) Heat
(A) Start (C) ON
(A)
When the key switch is in position
"A", the engine and all electrical de-
vices in the vehicle stop.
ACC(B)
When the key switch is turned to the
position "B", only electrical devices,
such as the audio system and work
light, can be operated. The cigarette
lighter and headlamps can be oper-
ated only when the switch is turned
to the "ON" position.
(C)
The position "C" indicates the "ON"
position. As soon as the key switch
is turned to this position, the oil pres-
sure warning lamp and battery
charge warning lamp comes on
(These become off after the engine
is started). The preheat operation is
automatically started. The automatic
preheat operation is indicated by the
H11O405A
glow plug indicator. Make sure to
preheat the engine until the glow plug
(D) ACC
(E) OFF
indicator goes off (approx. 9 seconds)
in cold weather.
(D)
The position "D" indicates the
"manual preheat" position, which is
not used in normal conditions. This
position is a self-return type, so the
key should be held there while using.
This position can be used in very cold
weather to preheat the engine manu-
ally in order to start the engine. Us-
ing this position for more than 30
seconds consecutively can reduce
the preheat system's life.
DESCRIPTION OF OPERATING SYSTEM
(E)
The position "E" indicates the "Start"
. In order to start the engine, depress
the clutch pedal(For the HST model,
the range shift lever should be in the
neutral position.) and put the PTO
switch into the OFF position. As
soon as the engine is started, re-
lease the key and the key switch is
returned to the position "C".
4
-7
4