Fayat Dynapac CC900G Instruction Manual page 52

Figure. Releasing the brake
44
2. Press the screws (192) inwards to compress the
springs (193) so that the screw reaches the brake
(107) inner thread.
3. Tighten the two screws (192) alternately a little at a
time so that the brake piston (107) loose (screw
approximately 2 turns).
Tightening the screws (192) too hard can damage Tightening the screws (192) too hard can damage
the inner mechanism the inner mechanism
The machine should be started with reactivated The machine should be started with reactivated
brake. brake.
Restored brake Restored brake
Undo the two screws (192) alternately, and then insert Undo the two screws (192) alternately, and then insert
the plugs (191). the plugs (191).
4812274432.pdf
Miscellaneous
2017-07-10