Driving; Operating The Roller - Fayat Dynapac CC900G Instruction Manual

3
Figure. Instrument panel
1. Ignition key
2. Speed control
3. Parking brake
6. Forward/Reverse lever
8. Sprinkler knob
10. Emergency stop
32
Carefully move the forward/reverse lever (6) forwards
or backwards, depending on which direction of travel
is required.
Speed increases as the lever is moved away from the
neutral position.
The speed should always be controlled using the The speed should always be controlled using the
forward/reverse lever and never by changing the forward/reverse lever and never by changing the
engine speed. engine speed.
Test the function of the reserve brake by activating
parking brake (3) while the roller is moving slowly
forwards and backwards.
Check when operating that the warning lamps do not
come on.
A hydraulic fluid cooler is recommended for warm
ambient temperatures and long operating periods

Driving

Operating the roller

Under no circumstances is the machine to be Under no circumstances is the machine to be
operated from the ground. The operator must be operated from the ground. The operator must be
seated inside the machine during all operation. seated inside the machine during all operation.
8
10
Deactivate parking brake knob (3). Be prepared that
the roller can move.
1
Check that the steering is working correctly by turning
6
the steering wheel once to the right and once to the
left while the roller is stationary.
2
When compacting asphalt, remember to turn on the
sprinkler system (8).
Make sure that the area in front of and behind the Make sure that the area in front of and behind the
roller is clear. roller is clear.
4812274432.pdf
Operation
2017-07-10