Rops - Bolts; Identification; Machine Plate - Fayat Dynapac CC900G Instruction Manual

Fig. Operator's platform, left side

1. Machine plate

2017-07-10
Technical specifications - Dimensions

ROPS - bolts

Bolt dimensions : Bolt dimensions :
Strength class : Strength class :
Tightening torque : Tightening torque :

Identification

Machine plate
1
The machine plate (1) is attached to the front left side
of the rear frame, beside the steering joint.
The plate specifies the manufacturers name and
address, the type of machine, the PIN, Product
Identification Number (serial number), operating
weight, engine power and year of manufacture. CE
markings and the year of manufacture may be omitted
on machines supplied to markets outside the EU.
Please state the machine's PIN when ordering
spares.
4812274432.pdf
ROPS-bolts which are to be torque tightened ROPS-bolts which are to be torque tightened
must be dry. must be dry.
M12 (PN 508063) M12 (PN 508063)
8.8 8.8
70 Nm 70 Nm
19