Fayat Dynapac CC900G Instruction Manual page 102

Fig. Engine compartment, right side
4. Filler cap
94
Undo the oil filler cap (4) and remove the plug (2) from
4
the end of the drain hose (1); allow all the engine oil to
run out.
Remove the oil filter (3) and insert a new one.
Collect any spillage.
Fit the drain plug (2) to the end of the hose.
Fill with fresh engine oil (see under Lubricants heading
for the correct oil grade), refit the filler cap (4) and
check the level on the dipstick.
Start the engine and check the tightness around the oil
filter.
4812274432.pdf
Maintenance - 2000h
Deliver the drained oil to special waste handling. Deliver the drained oil to special waste handling.
Refer to the engine manual for detailed Refer to the engine manual for detailed
instructions when changing oil and filters. instructions when changing oil and filters.
2017-07-10