Miscellaneous; Locking The Articulation; Lifting The Roller; Unlocking The Articulation - Fayat Dynapac CC900G Instruction Manual

Fig. Steering joint
1. Locking arm
2. Cotter pin in locked position
Weight: refer to the hoisting plate on
the roller
Fig. Roller prepared for lifting
1. Hoisting plate
Fig. Articulated joint
1. Locking arm
2. Cotter pin in open position
2017-07-10

Miscellaneous

Locking the articulation

Turn the steering wheel to the straight ahead position.
1
Raise the locking arm (1) and turn 180 degrees
downward. Ensure that the cotter pin (2) is guided into
2 its lower position correctly for locking the articulation.

Lifting the roller

1

Unlocking the articulation

1
2
Raise the locking arm (1) and turn it 180 degrees
upward. Check that the cotter pin (2) is guided
correctly into position for unlocking the articulation.
4812274432.pdf
The machine's gross weight is specified on the The machine's gross weight is specified on the
hoisting plate (1). Refer also to the Technical hoisting plate (1). Refer also to the Technical
specifications. specifications.
Lifting gear such as chains, steel wires, straps, Lifting gear such as chains, steel wires, straps,
and lifting hooks must be dimensioned and used and lifting hooks must be dimensioned and used
in accordance with the applicable safety in accordance with the applicable safety
regulations for lifting devices. regulations for lifting devices.
Stand well clear of the hoisted machine! Make sure Stand well clear of the hoisted machine! Make sure
that the lifting hooks are properly secured. that the lifting hooks are properly secured.
Remember to unlock the articulation before Remember to unlock the articulation before
operating. operating.
Miscellaneous
41