Maintenance - 50H; Brakes - Check - Fayat Dynapac CC900G Instruction Manual

3
Figure. Control panel.
3. Parking brake
12. Parking brake warning lamp
2017-07-10

Maintenance - 50h

Brakes - Check

Drive the roller slowly forwards.
Activate parking brake (3). The parking brake warning
lamp (12) should light and the roller should stop.
After testing the brakes, set the forward/reverse lever
in neutral.
Deactivate the parking brake (3).
The roller can now be started.
12
Refer also to the section in the manual on operation.
4812274432.pdf
Park the roller on a level surface. Park the roller on a level surface.
When checking and making adjustments, the When checking and making adjustments, the
engine should be switched off and the engine should be switched off and the
emergency/parking brake should be applied, if emergency/parking brake should be applied, if
not otherwise specified. not otherwise specified.
Check that the engine cover is fully open before Check that the engine cover is fully open before
carrying out work underneath it. carrying out work underneath it.
Check the brakes by carrying out the following: Check the brakes by carrying out the following:
Maintenance - 50h
69