Parking Brake; Emergency Stop; Operator Position - Fayat Dynapac CC900G Instruction Manual

3
Figure. Control panel

3. Parking brake

10. Emergency stop

2
1
Fig. Operator's station
1. Seat belt
2. ROPS (Option)
3. Anti-slip
30
Parking brake
The machine starts with the parking brake deactivated.
10
Emergency stop
The machine starts with emergency stop pulled out.

Operator position

If a ROPS (Roll Over Protective Structure) (2) is fitted
3
to the roller, always wear the seat belt (1) provided
and wear a protective helmet.
4812274432.pdf
Activate parking brake before leaving the machine.
Replace the seat belt (1) if it shows signs of Replace the seat belt (1) if it shows signs of
wear or has been subjected to high levels of wear or has been subjected to high levels of
force. force.
Never use the forward/reverse levers as a handle Never use the forward/reverse levers as a handle
when mounting or disembarking from the roller. when mounting or disembarking from the roller.
Ensure that the anti-slip (3) on the platform is in Ensure that the anti-slip (3) on the platform is in
good condition. Replace where anti-slip friction is good condition. Replace where anti-slip friction is
poor. poor.
Operation
2017-07-10