Function Description - Fayat Dynapac CC900G Instruction Manual

No No Designation Designation
1. Starter switch
2. Control, engine speed
3. Parking brake
4. Vibration On/Off. Switch
5. Fuel level, hour meter
6. Forward/Reverse lever
7. Fuse box (on control column)
8. Sprinkler, control
9. Horn, switch
10. Emergency stop
11. Choke
12. Parking brake warning lamp,
Hydraulic oil temperature
2017-07-10

Function description

Symbol Symbol Function Function
The electric circuit is broken.
All instruments and electrical controls are supplied
with power
Starter motor activation.
Pull the lever up to obtain working speed. Move the
lever down to obtain idling speed.
The parking brake is activated if pressed when the
machine is stationary. The brakes are released when
pulled out.
When the switch for vibrations in the forward/reverse
lever is pressed and released, the vibrations are
engaged. Press the switch again to disengage the
vibrations.
The lever must be in neutral to start the petrol engine.
The engine cannot be started if the forward/reverse
lever is in any other position.
The forward/reverse lever controls both the roller's
driving direction and speed. When the lever is moved
forward, the roller moves forward etc.
The roller's speed is proportional to the distance the
lever is from the neutral position. The further the lever
is from the neutral position, the higher the speed.
Contains fuses for the electrical system. See under
the heading 'Electrical system' for a description of
fuse functions.
Turn the knob clockwise to switch on the water flow to
the drum.
Press to sound the horn.
Brakes the roller and switches off the engine. The
power supply goes off.
NOTE: The emergency stop must be deactivated
when starting the machine.
Used in the pulled out position if necessary when the
engine is started.
4812274432.pdf
Machine description- Decals
27