Forward/Reverse Controls And Joints - Check And Lubrication - Fayat Dynapac CC900G Instruction Manual

Figure. Forward/reverse lever
1. Friction nut
2
1
Fig. Engine compartment
1. F/R lever cable
2. Heat cover
3. Air filter
76
1
3
4812274432.pdf
Maintenance - 200 / 400 / 600 / 800 h
Forward/Reverse controls and joints - Check
and lubrication
Unscrew the protective plate. Check the friction on the
forward/reverse lever. The friction nut (1) should be
applied with sufficient pressure to keep the
forward/reverse lever in the set position during
operation.
If the lever gets stiff after prolonged use, lubricate the
lever at the bearing bushings and at the cable with a
few drops of oil at each place.
If the forward/reverse lever still is stiff after the above
adjustments, lubricate the other end of the control
cable with a few drops of oil. The cable is located on
the top of the propulsion pump.
2017-07-10