Safety - General Instructions - Fayat Dynapac CC900G Instruction Manual

1. 1. The operator must be familiar with the contents of the OPERATION section The operator must be familiar with the contents of the OPERATION section
before starting the roller. before starting the roller.
2. 2. Ensure that all instructions in the MAINTENANCE section are followed. Ensure that all instructions in the MAINTENANCE section are followed.
3. 3. Only trained and/or experienced operators are to operate the roller. Only trained and/or experienced operators are to operate the roller.
Passengers are not permitted on the roller. Remain seated at all times when Passengers are not permitted on the roller. Remain seated at all times when
operating the roller. operating the roller.
4. 4. Never use the roller if it is in need of adjustment or repair. Never use the roller if it is in need of adjustment or repair.
5. 5. Only mount and dismount the roller when it is stationary. Use the intended Only mount and dismount the roller when it is stationary. Use the intended
grips and rails. Always use the three-point grip (both feet and one hand, or grips and rails. Always use the three-point grip (both feet and one hand, or
one foot and both hands) when mounting or dismounting the machine. one foot and both hands) when mounting or dismounting the machine.
Never jump down from the machine. Never jump down from the machine.
6. 6. The ROPS (Roll Over Protective Structure) should always be used when the The ROPS (Roll Over Protective Structure) should always be used when the
machine is operated on unsafe ground. machine is operated on unsafe ground.
7. 7. Drive slowly in sharp bends. Drive slowly in sharp bends.
8. 8. Avoid driving across slopes. Drive straight up or straight down the slope. Avoid driving across slopes. Drive straight up or straight down the slope.
9. 9. When driving close to edges, ditches or holes, make sure that at least 2/3 of When driving close to edges, ditches or holes, make sure that at least 2/3 of
the drum width is on previously compacted material (solid surface). the drum width is on previously compacted material (solid surface).
10. Make sure that there are no obstacles in the direction of travel, on the 10. Make sure that there are no obstacles in the direction of travel, on the
ground, in front of or behind the roller, or overhead. ground, in front of or behind the roller, or overhead.
11. Drive particularly carefully on uneven ground. 11. Drive particularly carefully on uneven ground.
12. Use the safety equipment provided. The seat belt must be worn on machines 12. Use the safety equipment provided. The seat belt must be worn on machines
fitted with ROPS/ROPS-cab. fitted with ROPS/ROPS-cab.
13. Keep the roller clean. Clean any dirt or grease that accumulates on the 13. Keep the roller clean. Clean any dirt or grease that accumulates on the
operator platform immediately. Keep all signs and decals clean and legible. operator platform immediately. Keep all signs and decals clean and legible.
14. Safety measures before refueling: 14. Safety measures before refueling:
- Stop the engine - Stop the engine
- Do not smoke. - Do not smoke.
- No naked flames in the vicinity of the roller. - No naked flames in the vicinity of the roller.
- Earth the filling equipment nozzle to the tank opening to avoid sparks. - Earth the filling equipment nozzle to the tank opening to avoid sparks.
15. Before repairs or service: 15. Before repairs or service:
- Chock the drums/wheels and under the strike-off blade. - Chock the drums/wheels and under the strike-off blade.
- Lock the articulation if necessary - Lock the articulation if necessary
2017-07-10

Safety - General instructions

Safety - General instructions
(Also read the safety manual)
4812274432.pdf
3