Introduction; The Machine; Intended Use; Warning Symbols - Fayat Dynapac CC900G Instruction Manual

2017-07-10

Introduction

The machine

Dynapac CC900G is a self-propelled vibratory tandem
roller in the 1,6 metric tonnes class featuring 900 mm
wide drums. The machine is equipped with drive,
brakes, and vibration on both drums.

Intended use

CC900G is primarily used for smaller compaction
works, such as minor roads, sidewalks, cycle ways
and minor parking places.

Warning symbols

WARNING ! Marks a danger or a hazardous WARNING ! Marks a danger or a hazardous
procedure that can result in life threatening or procedure that can result in life threatening or
serious injury if the warning is ignored. serious injury if the warning is ignored.
CAUTION ! Marks a danger or hazardous CAUTION ! Marks a danger or hazardous
procedure that can result in damage to the procedure that can result in damage to the
machine or property if the warning is ignored. machine or property if the warning is ignored.

Safety information

The safety manual supplied with the machine The safety manual supplied with the machine
must be read by all roller operators. Always must be read by all roller operators. Always
follow the safety instructions. Do not remove follow the safety instructions. Do not remove
the manual from the machine. the manual from the machine.
Read the entire manual before starting the Read the entire manual before starting the
machine and before carrying out any machine and before carrying out any
maintenance. maintenance.
Ensure good ventilation (extraction of air by fan) Ensure good ventilation (extraction of air by fan)
where the engine is run indoors. where the engine is run indoors.
Replace immediately the instruction manuals if Replace immediately the instruction manuals if
lost, damaged or unreadable. lost, damaged or unreadable.
4812274432.pdf
Introduction
1