Middle Frame Assembly Removal - Epson Stylus Color 1520 Service Manual

&2/25
EPSON Stylus 1520

3.2.10.14 Middle Frame Assembly Removal

1. Remove the printer mechanism unit. (Refer to Section 3.2.6.)
2. Remove the paper eject frame. (Refer to Section 3.2.10.7.)
3. Remove the pump unit. (Refer to Section 3.2.10.8.)
4. Remove the CR unit. (Refer to Section 3.2.10.9.)
5. Remove the base frame assembly. (Refer to Section 3.2.10.10.)
6. Remove the PF roller assembly. (Refer to Section 3.2.10.12.)
7. Remove the edge guide unit. (Refer to Section 3.2.10.6.)
8. Remove 1 screw (CBS, 3X6) securing the paper loading guide frame to the middle frame assembly.
9. Remove the connector cable for the middle frame assembly from the clamp.
10. Remove 2 screws (CBS, 3X6) securing the middle frame assembly to the bottom main frame assembly.
Then remove the middle frame assembly.
Paper Loading Guide Frame Assembly
3-32
Screw (CBS 3X6)
Middle Frame Assembly
Figure 3-30. Middle Frame Assembly Removal
Screws (CBS 3X6)
Main Bottom Frame Assembly