Adjustment Lever - Epson Stylus Color 1520 Service Manual

1.2.7 Adjustment Lever

The adjustment lever, located on the upper left side of the printer, is used to adjust the gap between the
paper and platen. The adjustment lever must be set to the proper position for the paper type to prevent the
paper from smudging.
Cut sheet
Transparency
Continuous paper
Index card
Envelopes
Table 1-12. Adjustment Lever Position
Paper
Type
Far side (0)
Near side (+)
0
+
Figure 1-6. Adjustment Lever Settings
Lever Platen Gap Adjustment
Position
+ 0.03 in (0.7 mm)
Adjustment Lever
Product Description
Value
0 in
1-13