Epson Stylus Color 1520 Service Manual page 134

6.1 Cleaning
This chapter provides information on maintenance of this printer. This printer is basically designed to require
no cleaning. It is, however, preferable to perform cleaning to keep the optimum quality of functionality and
output for a long period of time.
;
Be sure to unplug the AC power cable before cleaning the printer.
;
Be careful not to get ink in your eyes. If ink does get in your eyes, flush them immediately with fresh
water and see a doctor.
;
Follow the instructions below when handling the lithium battery installed on the C211 main board.
T
Keep the battery away from any metal materials.
T
Insert the battery in the right direction. Otherwise it may result in an explosion.
T
Do not expose the battery to excessive heat or fire.
;
Never apply thinner, trichloroethilene, or toner-based solvents. Use a soft, dry cloth to clean the
printer. In case of stains, use a cloth soaked with mild detergent.
;
To prevent damage to cases, do not use a hard brush for cleaning.
;
Be careful not to damage any interior parts when cleaning inside the printer.
;
When transporting the printer, make sure the ink cartridges are installed and the CR unit is fixed.
;
The ASP printer mechanism is not lubricated. Apply lubricants to the paper eject frame when
replacing it.
WARNING
CAUTION
CAUTION
Maintenance
6-1