Middle Frame Removal - Epson STYLUS COLOR 3000 Service Manual

EPSON Stylus COLOR 3000

Middle Frame Removal

1. Remove the upper housing (See page 3-4).
2. Remove the printer mechanism (See page 3-10).
3. Remove the paper eject frame (See page 3-21).
4. Remove the pump (See page 3-23).
5. Remove the edge guide (See page 3-23).
6. Remove the CR unit (See page 3-30).
7. Remove the paper feed shaft (See page 3-32).
8. Remove the PF roller (See page 3-35).
9. Remove one screw (CBS, 3x6) securing the paper feed frame guide to the middle frame.
10. Remove the connector cable for the middle frame from its clamp.
11. Remove two screws (CBS, M 3×6) securing the middle frame to the bottom frame and 1 screw (CBS,
3x8) holding the ink cartridge holder base. Then remove the middle frame.
CBS Screws (3×6)
Middle Frame
Bottom Main Frame
CBS Screw (3×8)
Flange Nut
LD Guide Frame
Rear Paper Guide Assembly
Edge Guide
Figure 3-36. Middle Frame Removal
3-37
EPSON Stylus Color 3000 Service Manual