Epson Stylus Color 1520 Service Manual page 31

EPSON Stylus COLOR 1520
Panel Functions
The function of each button is described below.
‰
Power
‰
Load/Eject
‰
LF/FF
‰
Pause
‰
Micro-adjust ↑
‰
Micro-adjust ↓
‰
Cleaning (Black)
‰
Cleaning (Color)
‰
Alt
Notes)
1
Before the printer power is off, the printer executes the capping function.
*
2
* When the micro adjust is performed at the TOF (Top Of Form position) for the ASF manual and
tractor feed, the new setting is stored in the corresponding address in the EEPROM.
3
* When the micro adjust is performed at the tear off position, the new setting is stored in the
corresponding address in the EEPROM.
;
The power switch is connected to the secondary side of the electrical circuit. Since it has a delay
circuit, voltage is still applied for the specified period of time after the printer power is off.
;
As long as the printer is plugged in, voltage is applied to the primary side of the electrical circuit.
Therefore, be sure to unplug the printer before servicing or replacing the interface.
1-24
Function Turns the printer off or on *
Available at Always
Function Loads and ejects the paper.
Available at Pause/Stand-by
Function Feeds one line or page.
Available at Pause / Stand-by
Function Alternates the printer between printing and non-
printing states.
Available at Pause / Stand-by
Function Pressing for 3 seconds resets the printer.
Available at Pause / Stand-by
Function Feeds paper forward and is used to execute TOF
adjustment *
Available at Pause / Stand-by
Function Feeds paper backward and performs TOF adjustment *
and Tear off adjustment *
Available at Pause / Stand-by
Function Executes the black ink cartridge cleaning.
Available at Pause
Function Executes the color ink cartridge cleaning.
Available at Pause
Function Enters ink cartridge change mode. Pressing this button
for 3 seconds moves the ink cartridge to the position to
be replaced.
Available at Pause / Ink out
CAUTION
1
.
2
and Tear off adjustment *
3
.
3
.
2