Manual Cleaning Method - Roland VersaUV LEF2-300 Regular Maintenance Manual

Manual Cleaning

Manual Cleaning Method

Perform manual cleaning once per week, if the inside of the machine is dirty due to ink mist, or if
dot drop-out or ink drip issues that cannot be improved with powerful cleaning occur.
CAUTION
I M P O R TA N T
Important notes on this procedure
• Before performing this operation, remove any objects to be printed on.
• To prevent the print heads from drying out, finish this procedure in 10 minutes or less. A warning
beep sounds after 10 minutes.
• Never use any implements other than the included cleaning sticks. Cotton swabs or other lint-
producing items may damage the print heads. To purchase cleaning sticks, contact your authorized
Roland DG Corporation dealer or visit our website (http://www.rolanddg.com/).
• Promptly dispose of cleaning sticks after using them once. Reusing cleaning sticks immediately or
after time has passed will have a negative effect on the print heads.
• Do not put a cleaning stick that has been used for cleaning into the cleaning liquid. Doing so will
deteriorate the cleaning liquid.
• Never rub the print head surface (nozzle surface).
• Stroke the sponges of the print head cap very gently, applying as little pressure as possible. Never
rub, scrape, or crush them.
If a warning beep sounds during cleaning
A warning beep sounds 10 minutes after operation begins. Stop work, close all the covers, and
then press [ENTER] to end the manual cleaning mode. After that, restart the procedure from
the beginning.
Cleaning sticks
1.
Perform manual cleaning.
Procedure
Remove the object to be printed on.
A
Move the print-head carriage.
B
1 Press [MENU].
2.Regular Maintenance
50
Be sure to perform operations as specified by the instructions above, and
never touch any area not specified in the instructions.
Sudden movement of the machine may cause injury.
Required items
Cleaning liquid