Clean the locations shown in the following figure.
H
Only stroke the sponges gently, do not rub them forcefully.
When you have finished cleaning, close the maintenance cover.
I
Close the front cover.
J
Press [ENTER].
K
The screen shown below appears. Proceed to step
DO REFRESH?
[YES]
NO
2.
Perform head refreshing.
P. 36 "Head Refreshing Method"
"
3.
Perform a printing test to check the results.
Procedure
Load the object to be printed on.
A
Set the print area.
B
Press [FUNCTION], and then press [ ].
C
B
in
P. 36 "Head Refreshing Method"
2.Regular Maintenance
Manual Cleaning
.
53