Roland VersaUV LEF2-300 Regular Maintenance Manual page 45

Select the group of print heads to clean.
F
1 Press [ ] or [ ] to select the group of print heads that is not to be cleaned.
MEDIUM CL.
AB
2 Press [ ] or [ ] to get rid of the group display.
MEDIUM CL.
A
3 Repeat steps
cleaning.
Only the displayed groups will be cleaned. If A and B are displayed, they will both be cleaned.
Press [ENTER].
G
The screen shown below appears, and then cleaning starts. The (approximate) remaining
time for the procedure is displayed on the screen. (The display shown below is an example.
"01:45" = "1 minute and 45 seconds")
CLEANING...
>> 01:45
When finished, the screen shown below appears again.
MEDIUM CL.
AB
Press [ ] twice.
H
Display the printing test menu.
I
TEST PRINT
Press [ ] several times to display the screen shown below.
It is difficult to check the white ink if the paper for use in the printing test is white. We
recommend printing on transparent paper.
CLEANING
TEST PRINT
TEST PRINT 2
Press [ ] several times to display the screen shown below.
Because white ink is printed on a black undercoat, white ink can be easily checked even when
printed on white paper. However, printing takes longer than "TEST PRINT."
CLEANING
TEST PRINT2
and to display only the group of print heads that requires
1 2
When Normal Cleaning Is Not Effective
2.Regular Maintenance
43