Cleaning the Machine
Clean the locations shown in the following figure.
F
Carriage fan and the surface
of the print-head carriage
Vicinity of the flat table
Vicinity of the inlet of the
ventilating equipment
When you have finished cleaning, close the maintenance cover.
G
Catch the maintenance cover pins on the notches, and then attach the maintenance cover.
2.Regular Maintenance
14
Frequently clean the inside of the machine using a vacuum cleaner
or by wiping with a cloth moistened with water then wrung dry. If
dust and dirt accumulate in the machine, they are likely to affix to
printed materials.
2
3