Roland VersaUV LEF2-300 Regular Maintenance Manual page 17

Close the front cover.
H
Press [ENTER].
I
The screen shown below appears.
DO REFRESH?
[YES] NO
Perform head refreshing in the following situations.
• After daily operations.
• When the message "DO HEAD REFRESH" appears.
• When dot drop-out or dot displacement occurs.
• After the "manual cleaning" process (the head refreshing menu is displayed
automatically).
• When an emergency stop occurs.
• When switching on the main power and sub power after the main power was
previously switched off.
If head refreshing is not necessary, select [NO]. When the following screen is displayed again,
the cleaning is finished.
SETUP MEDIA
R E L AT E D LI NKS
P. 36 "Head Refreshing Method"
"
Cleaning the Machine
2.Regular Maintenance
15