Roland VersaUV LEF2-300 Regular Maintenance Manual page 43

P o i nt
• If there are minor traces of ink being wiped off onto the sheet, head refreshing has failed. Check
the following points, and then perform head refreshing again.
¾ Has the head cleaning sheet been attached in the correct position?
¾ Is the head cleaning sheet loose?
¾ Has cleaning liquid soaked into the entirety of the head cleaning sheet?
¾ Has too much cleaning liquid been applied? (The appropriate amount is two [A] or three [B]
drops per cleaning pad.)
• Cleaning pads cannot be used if they are severely deformed (warped or tilted) or are coming free
of the unit. Replace the cleaning pad unit. For information on replacement, contact your authorized
Roland DG Corporation dealer.
Remove the head refresher.
S
M E M O
You can place the head refresher in the space on the left side of the machine. Do not place
anything here other than the head refresher, head cleaning sheet, and bottle for head refreshing.
Close the front cover.
T
Press [ENTER].
U
When one of the following screens is displayed again, head refreshing is finished.
V
CLEANING
HEAD REFRESH
RE LATE D LI NK S
P. 50 "Manual Cleaning Method"
"
SETUP MEDIA
Maintenance That Must Be Performed Daily
2.Regular Maintenance
41