Roland VersaUV LEF2-300 Regular Maintenance Manual page 39

M E M O
Selecting "NO" returns the display to the top menu. However, the same message will be
displayed once a certain amount of time has passed and in specific situations (such as before
the start of manual cleaning and during wiper replacement). Head refreshing is an important
operation that keeps the print heads in good condition. Perform this operation with as close to
the appropriate timing as possible.
Press [ENTER].
C
Proceed to step G
Press [FUNCTION].
D
Press [ ] to display the screen shown below.
E
CLEANING
HEAD REFRESH
Press [ENTER].
F
When the following screen is displayed, open the front cover.
G
SET HEAD
REFRESHER
Check that nothing has been placed on top of the flat table.
H
Remove any objects to be printed on and jigs that are present.
Attach the head refresher to the flat table in the prescribed location.
I
I M P O R TA N T
Be sure to attach the head refresher in this position. Attaching it in the incorrect position may
lead to malfunctions caused by the head refresher hitting the print heads.
.
Maintenance That Must Be Performed Daily
2.Regular Maintenance
37