Roland VersaUV LEF2-300 Regular Maintenance Manual page 26

Disposing of Discharged Fluid
Wipe away any discharged fluid that has dripped onto the outside of the drain bottle.
C
Quickly attach the drain bottle to the machine once more.
D
1 Set the drain bottle in place, and then push down on the opening of the bottle.
2 While pushing down on the opening, slide the bottle to the back, ensuring that
the bottle stays on the bottom plate.
3 When the drain bottle reaches the wall, remove your hand.
P o in t
Push the drain bottle all the way to the back, ensuring that the opening does not get caught
on the frame (A).
4 Check that the drain bottle has been pushed all the way to the back and does not
move.
If the drain bottle is not in the correct position, the drain hose will be misaligned, which
may lead to discharged fluid spilling out.
I M P O RTA N T
If the message "EMPTY DRAIN BOTTLE" is displayed even after you have attached the drain
bottle, the drain bottle may not have been set in place correctly.
Remove the drain bottle, and then attach it again.
2.Regular Maintenance
24
Not OK
A
OK