Extron electronics TLI Pro 101 User Manual page 35

5.
Scroll down the page until you find the firmware for the TLI Pro 101.
NOTE:
been released since the product was first introduced.
6. (Optional) Click
, on the previous page).
2
7. Click
Download
8. Follow the on-screen instructions to download the program. An executable file is
downloaded to the PC.
9. Go to the
default, it is stored at
name>\<firmware version>
10.
Use Toolbelt or the Touchpanel web page to upload this file to the touchpanel (see the
Toolbelt Help File or the following section).
Updating Firmware Using the Touchpanel Web Page
1. If you have not already done so, download the firmware file to a computer on the same
network as the touchpanel (see the previous section).
2.
Open the
Figure 29.
3.
Click Browse
4.
Click on the file to highlight it.
5.
Click
Upload
instructions.
Your product will appear in this list only if a new version of the firmware has
for more information about the firmware (see
Release Notes
( ).
3
folder and click on the file to install the firmware on the PC. By
Downloads
C:\\Program Files (x86)\Extron\Firmware\<product
.
TLI Pro 101 Web Page (see page 26).
Touchpanel Web Page: Firmware Uploader
and navigate to the firmware location.
. The firmware file is uploaded to the touchpanel. Follow the on-screen
TLI Pro 101 • Internal Web Pages
figure 28,
28