Switching Off The Equipment - Ier Automatic Systems BL52 Operating Manual

2.3.

Switching off the equipment


As soon as you open the housing, switch off the power by switching off the magneto-thermal circuit breaker
(4:1) located behind the side door (1:1).
4:1
The information contained in this document is the property of Automatic Systems and is confidential. The recipient shall refrain from using it for any purpose other than the use of the products or the
execution of the project to which it refers, and from communicating it to third parties without Automatic Systems' prior written agreement. Document subject to change without notice.
BL5x-MT-EN-13
4:1 Main circuit breaker
4:2 Ground terminal
Fig. 4
4:2
7/56
page