Prdstd - Bl_Xxx" Menu: Diagnosis And Monitoring - Ier Automatic Systems BL52 Operating Manual

"PRDSTD – BL_xxx" Menu: Diagnosis and monitoring
3.1.
This screen appears when the unit is turned on and when there has not been any navigation through the menus in Simplified
mode for 100 seconds.
Choose a language
using the ◄ button
Parameter
Soft. Version
The information contained in this document is the property of Automatic Systems and is confidential. The recipient shall refrain from using it for any purpose other than the use of the products or the execution of the project to which
it refers, and from communicating it to third parties without Automatic Systems' prior written agreement. Document subject to change without notice.
BL5x-MT-EN-13
Values Description
OK key: (only within this menu (*) and when no other parameter
is selected): command for opening and closing the obstacle.
OK during opening: without effect.
OK during closing: inversion (= opening).
OK maintained: oscillating movement around the opening limit
switch: the obstacle opens, starts closing, opens again, etc.
(*) Warning: in QUICKSTART menu, validating passage from
Extended to Simplified menus through the OK key causes also
an opening or closing movement of the arm, even if a presence
is detected by the Presence sensors.
Note: When the operating mode is configured as 1 contact (see
the Exploitation parameter in the QUICK START menu), the
obstacle closes automatically when the opening limit switch is
detected.
Left key (◄): Change the menu display language with each
touch.
EN = English
FR = Français
NL = Nederlands
DE = Deutsch
ES = Español
SV = Svenska
Select the language using the OK key or allow it to change
automatically after a few seconds, following which all of the
preceding parameter modifications (including the language) will
be saved in MEM1.
Display the software version used by the control unit, following
format type – evolution – version – revision – minor index of the
application.
The descriptions included in this chapter correspond to versions
00-00-06-rr-00.
IT = Italiano
Program name
Date (DD/MM)
Time (hh:mm)
12/56
page