Access Settings - ProSoft Technology RLX2-IHx Series User Manual

Configuring a Radio - Detailed Configuration
User Manual

4.3.3 Access Settings

You use the parameters in the A
RLX2-IHx series radio gets an IP address.
Note: Different versions of the RLX2-IHx series radios and firmware support different functions.
There may be fewer or more parameters on this page, depending on the version of the radio and
firmware.
Parameter
Obtain IP Address -DHCP
Use the following IP address
IP Address
Netmask
Def. Gateway
Alt IP Address
Alt Subnet Mask
To assign the IP address for your radio
1 On the B
ASIC
A
DDRESS
2 If you selected U
IP address.
3 Click A
PPLY
Page 78 of 250
CCESS
Description
Select this if the radio is to automatically get an IP address through
DHCP
Select this to manually define IP address for the radio. You must
also enter the IP address information in the remaining parameters.
Specifies the unique IP address assigned to the module
Specifies the subnet mask of module
Specifies the network gateway (if used)
Specifies a 2
Specifies the subnet mask for the 2
S tab, in the A
ETTINGS
- DHCP or U
SE THE FOLLOWING
SE THE FOLLOWING
C to reboot the Radio.
HANGES
S group to define how your
ETTINGS
nd
IP Address for the module to be used with VLANs
nd
IP Address
S group, click O
CCESS ETTINGS
IP .
ADDRESS
IP A , enter the information for the
DDRESS
RLX2-IHx Series ♦ 802.11a, b, g, n
Industrial Hotspots
IP
BTAIN
ProSoft Technology, Inc.