Pinging Devices On The Network - ProSoft Technology RLX2-IHx Series User Manual

Using the IH Browser to Manage your Radios
User Manual
5.8

Pinging Devices on the Network

You can use the Ping command to test the latency of the network link between
the PC running the IH Browser and any other PC that is also running the IH
Browser (called Ping Stations).
Note: Currently there is no location information when a ping station responds to an IH Browser
scan, therefore, all Ping stations are shown connected to the top main network. It is also possible
to select an RLX2-IHx series and start a Ping Session with it.
1 Start the IH Browser on your computer.
2 To start the ping session, do one of the following:
From the V
o
Click the Show Browsers button on the toolbar.
o
3 Click (highlight) one of the other computers visible in the IH Browser.
4 From the A
Dialog box.
This dialog box displays statistics on the minimum, maximum and average
latency between two points on the network.
5 Click S
HOW
Dialog Box (page 137).
Note: If there is no PC with an IH Browser behind a remote RLX2-IHx series radio, you can select
and ping the radio itself to text its wireless link.
Page 136 of 250
menu choose S
IEW
menu choose P
CTIONS
O to change the Ping parameters. See Ping Options
PTIONS
P S .
HOW ING TATIONS
D to open the Ping Results
ING EVICE
RLX2-IHx Series ♦ 802.11a, b, g, n
Industrial Hotspots
ProSoft Technology, Inc.