Approved Antenna Table; Approved Antennas In Europe/Ce - ProSoft Technology RLX2-IHx Series User Manual

RLX2-IHx Series ♦ 802.11a, b, g, n
Industrial Hotspots

13.3.1 Approved Antenna Table

Use the following approved antennas when the RLX2-IHx series radio module is
connected directly to an antenna. See Approved Antennas with Power Amp
(page 224) for a table of approved antennas with bi-directional power amplifiers.
Type
1/2 Wave
1/2 Wave art.
Collinear Array
Collinear Array, art. Omni
Collinear Array
Collinear Array
Collinear Array
Collinear Array
Patch
Patch
Patch
Patch*
Yagi
Parabolic*
Parabolic*
Parabolic*
* Only allowed in a point-to-point network.

13.3.2 Approved Antennas in Europe/CE

In Europe/CE, the gain of the antenna connected to the RLX2-IHx series radio
main antenna port, minus the antenna cable loss, must be less than 4 dB to stay
below the 100-mW EIRP transmit power limit.
The AUX port on the radio is only used to receive; it never transmits.
Note: In France, the user is responsible for ensuring that the selected frequency channels comply
with French regulatory standards. At the time of this printing, only channels 10 through 13 can be
used in France.
ProSoft Technology, Inc.
Pattern Gain Connector
Omni 2 dB SMA-RP
Omni 2 dB SMA-RP
Omni 3 dB SMA-RP
5 dB SMA-RP
Omni 5 dB SMA-RP
Omni 8 dB N-RP
Omni 9 dB N-RP
Omni 12 dB N-RP
Directional 8 dB SMA-RP
Directional 11 dB SMA-RP
Directional 13 dB N-RP
Directional 19 dB N-RP
Directional 14 dB N-RP
Directional 15 dB N-RP
Directional 19 dB N-RP
Directional 24 dB N-RP
Appendix G - Antenna Configuration
Size (cm) Min. distance
from Body
7H x 1.5 20 cm
10H x 1.0 20 cm
6H x 3.0 20 cm
19H x 1.0 20 cm
19H x 1.0 20 cm
43H x 1.6 20 cm
43H x 1.6 20 cm
106H x 4.0 25 cm
15.0H x 15.0 20 cm
22H x 12.7 22 cm
22H x 22 28 cm
15.5 x 15.5 57 cm
81L x 9.0 28 cm
40H x 51W x 25D 36 cm
58H x 66W x 26D 57 cm
78H x 96W x 29D 100 cm
User Manual
Page 223 of 250