ProSoft Technology RLX2-IHx Series User Manual page 46

RLX2-IHx Series Quick Setup
User Manual
You can add additional Repeater radios by repeating these steps. If you want to
make more changes to the radio's configuration, you can use the following steps.
1 Log into the radio.
2 Edit the R
Note: To communicate with each other, all RLX2-IHx series radios must communicate over the
same frequency as the Master radio.
3 If you set a temporary IP address in the radio (see Assigning a Temporary IP
Address (page 39)), set the permanent IP address. On the B
tab, in the A
THE FOLLOWING
4 Click A
PPLY
After rebooting successfully, the radio appears as a Repeater radio in the IH
Browser window:
Page 46 of 250
N if desired.
ADIO AME
S group, click O
CCESS ETTINGS
IP .
ADDRESS
C to reboot the Radio.
HANGES
RLX2-IHx Series ♦ 802.11a, b, g, n
ASIC
IP A - DHCP or U
BTAIN DDRESS
ProSoft Technology, Inc.
Industrial Hotspots
S
ETTINGS
SE