Resetting A Rlx2-Ihx Series Radio; Resetting The Rlx2-Ihnf-W And Rlx2-Ihnf-Wc To Defaults - ProSoft Technology RLX2-IHx Series User Manual

Diagnostics and Troubleshooting
User Manual
6.3

Resetting a RLX2-IHx series Radio

If you lose the password to a radio, you cannot change the radio settings. You
can reset the radio to restore the default password, but the radio loses all the
configuration settings and returns to the default settings.

6.3.1 Resetting the RLX2-IHNF-W and RLX2-IHNF-WC to Defaults

These steps reset the radio to its default settings, including the default password.
1 Remove power from the radio.
2 Press the Reset button. The Reset button is located on the front of the unit
just under the ProSoft logo.
3 While holding down the button, apply power to the radio and continue to hold
the button down for 30 seconds.
This resets the radio to its default settings. You can now log in to the radio
using the default password: password.
Page 180 of 250
RLX2-IHx Series ♦ 802.11a, b, g, n
Industrial Hotspots
ProSoft Technology, Inc.