Viewing Network Data In The Ih Browser; Viewing Wireless Clients In The Ih Browser - ProSoft Technology RLX2-IHx Series User Manual

Using the IH Browser to Manage your Radios
User Manual
5.9

Viewing Network Data in the IH Browser

The IH Browser I
the selected radio in either the List View or Topology View. The feature shows:

Wireless clients attached to the radio.

Information about devices detected via the Ethernet interface of the radio.

The 802.11 Access Points that are detected by this particular radio.

The active ports on the radio.

5.9.1 Viewing Wireless Clients in the IH Browser

The Client List dialog box can be opened to show information about wireless
clients connected to the currently selected radio. Radios with wireless clients are
identifiable as shown by the red outline in the List and Topology Views below.
1 In the IH Browser, select a radio in either the List View or Topology View.
2 From the I
choose W
Parameter
Refresh
Now
IP
MAC
Signal (dBm)
Age (sec)
Page 138 of 250
feature allows you to monitor the network connections for
NFO
menu choose W
NFO
C .
IRELESS LIENTS
Description
Data refresh interval in seconds or minutes. Select M
Browser from automatically updating the data.
Click N to manually update the data.
OW
Displays the IP addresses of the wireless clients connected to the radio.
Displays the MAC addresses of the wireless clients connected to the radio.
Displays the signal strength from the wireless clients connected to the radio.
Displays the age of the connection to the wireless clients connected to the radio
(the amount of time since a packet has been received from that device).
C , or right-click the radio and
IRELESS LIENTS
RLX2-IHx Series ♦ 802.11a, b, g, n
Industrial Hotspots
to prevent the IH
ANUALLY
ProSoft Technology, Inc.