Equipment Specification; Explanations Of Symbols; Air Pressures - Hunter TCX56 Operating Instructions Manual

Equipment specification

Voltage:
Amperage:
Air Pressure Requirements:
Approximate Air
Consumption:
Clamping System Rotating
Speed:
Max. Tire Diameter:
Max Bead Roller Opening
Width:
Diameter Range:

Explanations of symbols

These symbols may appear on the equipment.
Alternating current.
Earth ground terminal.
Protective conductor terminal.
Risk of electrical shock.
1.3.b. Air Pressures
The machine is equipped with an internal pressure limiting valve to minimize the risk of over
inflating the tire.
1. Never exceed these pressure limitations:
• Supply line pressure (from compressor) is 220 psi.
• Operating pressure (gauge on regulator) is 145 psi.
Bead setting pressure (gauge on hose) is the tire manufacturer's maximum pressure as
stated on the sidewall of the tire
2. Activate air inflation jets only when sealing bead.
Operation Instructions for TCX56/57 Tire Charger
Electrical
220 VAC, 1 phase, 50-60 Hz, includes NEMA L6-20P
20 amperes
Air
115-175 PSI (7.9-12.0 bar)
at 8 bar = 6 Lt/s • 0.2118 Ft3/s • 12,70 CFM (ft3/min)
at 10 bar = 7,76 Lt/s • 0.2471 Ft3/s • 14,82 CFM (ft3/min)
Mechanical
CW – 7 rpm and 17 rpm
CCW – 7rpm
43.3 in. w/BPS
DANGER
• EXPLOSION HAZARD
• Never exceed tire pressure recommended by
tire manufacturer. Never mismatch tire size
and rim size.
• Avoid personal injury or death
15 in.
10-30
17