Hunter TCX56 Operating Instructions Manual page 61

Wear personal protective equipment (PPE) and clothes, in compliance with the local rules
and regulations, including but not limited to OSHA. See your supervisor for instructions.
If you have any questions concerning the proper use or maintenance of your machine, please
contact your nearest Hunter Engineering Company representative.
You can also contact Hunter Engineering Company at
Tel: 800-448-6848 or 314-731-3020.
In case of a written request, please specify the:
• Machine model;
• Serial number;
• Detail of the problems encountered
• Inspections that have been performed
• Adjustments made and their outcome
• Any other useful information.
You may address your written requests to:
HUNTER ENGINEERING COMPANY
11250 Hunter Drive
Bridgeton, Missouri 63044
Fax: 314-731-1776
e-mail: Customerservice@hunter.com
The components of Hunter Engineering Company products are designed as a single
integrated system. To avoid compromises in terms of safety, performance, durability and
function, and to prevent voiding of the warranty, do not substitute Hunter Engineering
Company components with components manufactured by other companies. Use only
ORIGINAL replacement PARTS supplied by Hunter Engineering Company.
During maintenance procedures,
• Never modify or alter the machine or any of its components.
• Use proper stairs, ladders or platforms to access areas that cannot be reached from
ground level.
• Use appropriate personal protection equipment (PPE), such as eye protection, face
shield, respiratory protection, gloves and coveralls, when performing maintenance,
repairs or adjustments in compliance with local and OSHA regulations. Check with your
supervisor.
• Never attempt any repairs or adjustments to any hydraulic component or auxiliary unit,
including pumps, hoses, fittings, if the system is pressurized or operational or if the
machine is in operation. Always shut down the machine, relieve all pressure and wait for
all motion to come to a complete stop before performing any repairs or adjustments.
Operation Instructions for TCX56/57 Tire Charger 61