Power Source Precaution; Equipment Specification; Explanation Of Symbols - Hunter Revolution Series Operation Instructions Manual

Keep hair, loose clothing, neckties, jewelry, fingers, and all
parts of body away from all moving parts.
ALWAYS WEAR OSHA APPROVED SAFETY GLASSES.
Eyeglasses that have only impact resistant lenses are
NOT safety glasses.
CALIFORNIA WARNING
This product may contain chemicals
known to the State of California to
cause cancer and reproductive harm.
www.P65Warnings.ca.gov

1.3. Power Source Precaution

Revolution is intended to operate from a power source
that will apply 230VAC +10% / -15%, 1 phase, 24 amp
50/60 Hz power, power cable includes NEMA 30 amp
plug, L6-30P, between the supply conductors of the power
cord. Tire Changer is also capable of operating on
210-240VAC, 50 Hz at 24A for use in the international
market. The power cord supplied utilizes a twist lock con-
nector, NEMA L6-30P. This machine must be connected to
a 30 amp branch circuit, or as directed by local ordinan-
ces.
CAUTION
A protective ground connection,
through the grounding conductor is
the power cord, is essential for safe
operation. Use only a power cord that
is in good condition.
Hunter Revolution™ Series Tire Changer

1.4. Equipment Specification

1.5. Explanation of Symbols

Alternating Current
Earth ground terminal
Protective conductor terminal
ON / OFF (Supply) condition
Risk of electrical shock
Stand-by Switch
Not intended for connection to public network
Page 4 of 12