Table of Contents
Advertisement
Specific Precautions/Power Source
Equipment Installation and Service
Equipment Specifications
Electrical
Voltage:
Amperage:
Wattage:
Air
Air Pressure Requirements:
Approximate Air Consumption:
Mechanical
Clamping System Rotating
Speed:
Torque:
Max. Tire Diameter:
Max Bead Roller Opening Width: 15 in.
Diameter Range:
Bead Roller Power; Each Roller:
TC37 Series Changer Operation Instructions
The TC is intended to operate from a power source that will apply 208-230VAC, 1 phase,
15 amp 50/60 Hz, power cable includes NEMA 20 amp plug, L6-20P, between the supply
conductors of the power cord. The power cord supplied utilizes a twist lock connector,
NEMA L6-20P. This machine must be connected to a 20 amp branch circuit. Please refer
all power source issues to a certified electrician. Refer to "Installation Instructions for TC
Tire Changer.
CAUTION:
A protective ground connection, through the grounding
conductor in the power cord, is essential for safe operation.
Use only a power cord that is in good condition.
A factory-authorized representative should perform installation.
This equipment contains no user serviceable parts. All repairs must be referred to a
qualified Hunter Service Representative.
208-230VAC, 1 phase, 50/60 Hz, power cable includes
NEMA 20 amp plug, L6-20P
15 amperes
3450 watts (peak)
115-175 PSI (7.9-12.0 bar)
4 CFM (110 Liters/Minute)
CW – variable up to 14 rpm
CCW – 7rpm
867 ft-lbs
46 in.
10-26 in.
2645 lbs.
Getting Started• • • • 5
Advertisement
Table of Contents
